High accuracy pressure measuring for Airbags.

Pressure measuring

Early pressure error detection

Airbag pressure optimization

Increased safety

Release of operational readiness

Decreased risk of injury

Recorded data

Laser measuring techniques

Signal warning device for the operator

Airbags are becoming more widely used in snow/leisure parks. For safe operation a pressure measurement device is highly recommended. In collaboration with a well recognized engineering office and TÜV we have developed the AirBag Analyzer System.

efficiency.at & TÜV

efficiency.at & TÜV

better safe than sorry.

Status controlle & release

Status controlle & release

better safe than sorry.

Warning lights signal the release of the Air Bags

The increased security in the jump operation is given by various warning lights that signals when the air bag is released for the next jumper. The airbag Analyzer measures variations and activates various signal lamps based on the internal pressure of the air bag.

Increased safety for every Air Bag

Each Air Bag System can be retrofitted with airbag Analyzer. We recommend that each Air Bag operators to reap the benefits of this system. Also Air Bags from other manufacturers can retrofit the airbag Analyzer. The reduced risk of injury from the exact measurements in the jump operation should be important to each operation

Upgradeable

Upgradeable

better safe than sorry.

precise analysis

precise analysis

better safe than sorry.

Measuring the pressure inside the Air Bags

The airbag analyzer is a low pressure indication system developed for high accuracy pressure measurement in Airbags. The AirBagAnalyzer allows for flexibility in the required pressure range depending on the on the airbag system in use. A constant orange LED signal indicates the AirBagAnalyzer is on and ready for action. Once the pressure drops below a set safety level a siren signal and a red LED flash light is activated to provide warning to the operators of the airbag.

Airpuls 4.1

Airpuls is a further development of the AirBagAnalyzer. By using laser measuring techniques Airpuls can detect the distance between the bottom and top surface of the safety zone. The software within Airpuls combines the signals of all Airpuls modules and records the data along with date and time information which in turns allows the possibliity to compare the data with video squences.

Storage of measured values

Storage of measured values

better safe than sorry.